Planning Joints (ShipStructure) - Intergraph Smart 3D - Help - Hexagon PPM

Intergraph Smart 3D Reports

PPMProduct
Intergraph Smart 3D
aSubProduct
Drawings and Reports
PPMCategory_custom
Help
Version_SThreeD_Custom
13
SPFVersion_custom
10

Creates a planning joint report.

It is located in the [Reference Data Folder]\SharedContent\Reports\Types of Reports\ShipStructure\Planning Joint folder.

SP3DReport_Definition

Identifies the XML code used to define the report.

Report tab

   Plant #Plant::Name#

   Date #FormattingField::{DateTime}#

   User #FormattingField::{UserName}#

   PlanningJointID #PlanningJoint::PlanningJointID#    The unique key for a particular planning joint.

   PlanningJointName #PlanningJoint::PlanningJointName#

   PhysicalConnectionID #PlanningJoint::PhysicalConnectionID#    The unique key for a particular physical connection.

   AssemblyID #PlanningJoint::AssemblyID#    The Assembly ID to which the planning joint is assigned.

   Assembly Name #PlanningJoint::AssemblyName#

   Connected Part1 #PlanningJoint::Part1#

   Connected Part2 #PlanningJoint::Part2#

   Weld Type #PlanningJoint::WeldType#    Tee, Weld, ButtWeld, or LapWeld.

   Weld Dimension (Leg) m #PlanningJoint::WeldDimension#    Leg length of the welding.

   WeldEquipment #PlanningJoint::WeldEquipment#    Type of welding machine/equipment.

   WeldPosition #PlanningJoint::WeldPosition#    Flat, Vertical, Horizontal, or Overhead.

   WeldDirection #PlanningJoint::WeldDirection#    Up, Down, N/A (not-applicable), Unknown.

   Length(m) #PlanningJoint::Length#    Length of the planning joint.

   Groove Type #PlanningJoint::GrooveType#    Type of groove (edge preparation) used - X, I, V, Y, and so on.

   Accessibility #PlanningJoint::Accessibility#    Open space or Closed space.

   WeldInclination(rad) #PlanningJoint::WeldInclination#    Inclination of the planning joint is calculated based on the Manufacturing Orientation of the assembly.

   WeldRotation(rad) #PlanningJoint::WeldRotation#    Rotation of the planning joint is calculated based on the Manufacturing Orientation of the assembly.

   Root Gap m #PlanningJoint::RootGap#    Gap between the weld part and the joint part.

   WeldSide #PlanningJoint::WeldSide#    Determines the side of the welding. For plates: Molded and Anti-Molded. For profiles: the defined naming sides (Web-Left, Web, Right, and so on).

   WeldShape #PlanningJoint::WeldShape#    Curved or Straight.

   Land Length(Nose) m #PlanningJoint::LandLength#    The length of the land, if relevant.