Creates a report for manufacturing Pin Jig for association with a Drawings by Rule view. You can use this report when setting up a Drawing by Rule component to create Manufacturing Pin Jig drawings in the Drawings and Reports task. For more information, see the Orthographic Drawings User's Guide.
It is located in the [Reference Data Folder]\SharedContent\Reports\Types of Reports\ShipDrawings\Dependent View Reports\Mfg Pin Jig\Default Pin folder.
SP3DReport_Definition
Identifies the XML code used to define the report.
Report tab
Company Name
Jig Tables
Date/Time #FormattingField::{DateTime}#
Project #Plant::Name#
Block #DefaultPinReport::m_Block#
Curved Panel ID #DefaultPinReport::m_CurvedPanelId#
Jig Dimensions #DefaultPinReport::m_JigDimension#
Required Area #DefaultPinReport::m_RqArea#
1, 2 - Diagonal Lengths
3 - Aft Butt
4 - Upper Seam
5 - Fore Butt
6 - Lower Seam
7 - Horizontal Interval
8 - Vertical Interval
9 - Vertical Distance Between Nearest Pin and Jig Corner
10 - Horizontal Distance Between Nearest Pin and Jig Corner
11 -14 - Corner Pins
15 - Assembly Panel
16 - Pin Height
17 - Plate Seams
18 - Base Plane
|
Numeric Callouts |
Report Column Header at Design Time |
Description |
Design Time Values |
Example of Values at Runtime |
|
1,2 |
Diagonal Length |
Diagonal lengths on the pin jig 3D |
#DefaultPinReport::[outFormat_local_m_Diagonal_ALFU]# |
14779 |
|
10,11,12,13 |
Ground Information |
Names of the corner pins |
#GroundInfoReport::m_PinName# |
(H3, V12) |
|
9 |
Ground Information |
Vertical distance between nearest pin and corner of jig floor |
#GroundINfoReport::[outFormat_Loca_m_DY]# |
-175 |
|
10 |
Ground Information |
Horizontal distance between nearest pin and corner of jig floor |
#GroundInfoReport::[outFormat_Local_m_DX]# |
63 |
|
16 |
Ground Information |
Actual pin height |
#GroundInfoReport::[outFormat_Local_m_PinHeight]# |
937 |
|
7 |
Pin Interval |
Horizontal interval for pin jig spacing |
#DefaultPinReport::[outFormat_Local_m_HorizInterval]# |
600 |
|
8 |
Pin Interval |
Vertical interval for pin jig spacing |
#DefaultPinReport::[outFormat_Local_m_VertInterval]# |
500 |
|
3 |
Seam Girth Length |
Aft butt remarking line of pin jig |
#DefaultPinReport::[outFormat_Local_m_Girth_A_BUTT]# |
5953 |
|
4 |
Seam Girth Length |
Upper seam remarking line of pin jig |
#DefaultPinReport::[outFormat_Local_m_Girth_U_SEAM]# |
12084 |
|
5 |
Seam Girth Length |
Fore butt remarking line of pin jig |
#DefaultPinReport::[outFormat_Local_m_Girth_F_BUTT]# |
6778 |
|
6 |
Seam Girth Length |
Lower seam remarking line of pin jig |
#DefaultPinReport::[outFormat_Local_m_Girth_L_SEAM]# |
11378 |
Ground Info:
No. #GroundInfoReport::m_ItemNum#
Pin Name #GroundInfoReport::m_PinName#
dX #GroundInfoReport::m_DX#
dY #GroundInfoReport:: m_DY#
Pin Height #GroundInfoReport:: m_PinHeight#
Pin Height Summary:
|
Range |
Design Time Values |
Example of Values at Runtime |
|
Height <= 800 |
#PinSummaryReport::m_Range1# |
317 |
|
800 < Height <= 1300 |
#PinSummaryReport::m_Range2# |
19 |
|
1300 < Height <= 1800 |
#PinSummaryReport::m_Range3# |
0 |
|
1800 < Height |
#PinSummaryReport::m_Range4# |
1 |
Assembly Angle:
|
Axis |
Design Time Values |
Example of Values at Runtime |
|
X-Plane |
#DefaultPinReport::m_FrameNAssemblyAngle# |
65.1 |
|
Y-Plane |
#DefaultPinReport::m_ButtockLineNAssemblyAngle# |
138.1 |
|
X-Plane |
#DefaultPinReport::m_WaterLineNAssemblyAngle# |
58.7 |