Creates a manufacturing template set report with rows wrapped to fit for association with a Drawings by Rule view. You can use this report when setting up a Drawing by Rule component to create Manufacturing Template Set drawings in the Drawings and Reports task. For more information, see the Orthographic Drawings User's Guide.
It is located in the [Reference Data Folder]\SharedContent\Reports\Types of Reports\ShipDrawings\Dependent View Reports\Manufacturing Template sets\MfgTemplate - MultiRow folder.
SP3DReport_Definition
Identifies the XML code used to define the report.
Report tab
#DefaultReport_Header::TXT_TemplateName#
#DefaultReport_Header::TXT_Station_0# - #DefaultReport_Header::TXT_Step_19#
#DefaultReport_Data::DAT_TemplateName#
Length of Template
#DefaultReport_Data::DAT_HeightAtStep_0#
#DefaultReport_Data::DAT_HeightAtStep_10#
#DefaultReport_Data::DAT_TemplateLength#
Height at Length of Template
#DefaultReport_Data::DAT_HeightAtStep_1#
#DefaultReport_Data::DAT_HeightAtStep_11#
#DefaultReport_Data::DAT_HeightAtTemplateLength#
Height at Lower Seam
#DefaultReport_Data::DAT_HeightAtStep_2#
#DefaultReport_Data::DAT_HeightAtStep_12#
#DefaultReport_Data::DAT_HeightAtLowerSeam#
Girth along Lower Seam to Mid-Template
#DefaultReport_Data::DAT_HeightAtStep_3#
#DefaultReport_Data::DAT_HeightAtStep_13#
#DefaultReport_Data::DAT_Grt_Btm_LS_MidTemplateBtmLS#
Height at Upper Seam
#DefaultReport_Data::DAT_HeightAtStep_4#
#DefaultReport_Data::DAT_HeightAtStep_14#
#DefaultReport_Data::DAT_HeightAtUpperSeam#
Girth along Upper Seam to Mid-Template
#DefaultReport_Data::DAT_HeightAtStep_5#
#DefaultReport_Data::DAT_HeightAtStep_15#
#DefaultReport_Data::DAT_Grt_Btm_US_MidTemplateBtmUS#
Height at Base Control Line
#DefaultReport_Data::DAT_HeightAtStep_6#
#DefaultReport_Data::DAT_HeightAtStep_16#
#DefaultReport_Data::DAT_HeightAtBCL#
Girth along BCL to Mid-Template
#DefaultReport_Data::DAT_HeightAtStep_7#
#DefaultReport_Data::DAT_HeightAtStep_17#
#DefaultReport_Data::DAT_Grt_Btm_BCL_MidTemplateBtmBCL#
Template Angle
#DefaultReport_Data::DAT_HeightAtStep_8#
#DefaultReport_Data::DAT_HeightAtStep_18#
#DefaultReport_Data::DAT_TemplateAngle#
S_Value
#DefaultReport_Data::DAT_HeightAtStep_9#
#DefaultReport_Data::DAT_HeightAtStep_19#
#DefaultReport_Data::DAT_SValue#