Creates a report of piping part data for gear, side mounted inclined hand wheel Type 1 operator to be used for review and approval of the reference data in your catalog.
Piping Part Class Name and Unit of Measure inputs are required when running this delivered report. The following Operator Part Class/Piping Commodity Type mapping is used for this report:
|
Part Class |
Piping Commodity Type |
|
Operator351 |
Gear, side mounted inclined hand wheel Type 1 |
It is located in the [Reference Data Folder]\SharedContent\Reports\Types of Reports\Catalog Engineering Checks\Piping\Delivered Valve Operator Part Data\Piping Part Data Op008 folder.
SP3DReport_Definition
Identifies the XML code used to define the report.
Index tab
Worksheet Name
Remarks
CustomInterfaces
InterfaceName
Category Name
Attribute Name (the programmatic name of the attribute)
Attribute User Name
Type
UnitsType
PrimaryUnits
CodeList
codelisttablenamespace
OnPropertyPage
ReadOnly
SymbolParameter
GUIDS tab
Identifies the GUID mapping for the Class/InterfaceName and the AttributeName.
Piping Part Data Op008 tab
Part Class Type ValveOperatorClass
Symbol Definition #Plant::SymbolDefinition#
Valve Operator Number #PartData::ValveOperatorNumber#
Valve Size #PartData::ValveSize#
Valve Size Units #PartData::ValveSizeUnits#
Symbol Definition #PartData::SymbolDefinition#
Mirror Behavior Option #PartData::MirrorBehaviorOption#
Valve Operator is Rotatable #PartData::ValveOperatorIsRotatable#
Dry Weight #PartData::[lbl_DryWeight]#
Dry Cog X #PartData::[lbl_DryCogX]#
Dry Cog Y #PartData::[lbl_DryCogY]#
Dry Cog Z #PartData::[lbl_DryCogZ]#
Operator Height #PartData::[lbl_OperatorHeight]#
Operator Diameter #PartData::[lbl_OperatorDiameter]#
Arm Length #PartData::[lbl_ArmLength]#
Operator Depth #PartData::[lbl_OperatorDepth]#
Actuator Diameter #PartData::[lbl_ActuatorDiameter]#
Actuator Offset #PartData::[lbl_ActuatorOffset]#
Stem Extension #PartData::[lbl_StemExtension]#
Stem Angle #PartData::[lbl_StemAngle]#
Operator Cen From Top #PartData::[lbl_OperCenFromTop]#