Edit the Nominal Pipe Diameter Range in the Gasket Selection Filter Sheet - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D Piping Reference Data

PPMProduct
Intergraph Smart 3D
aSubProduct
Piping
PPMCategory_custom
Reference Data
Version_SThreeD_Custom
13

The Nominal Pipe Diameter Range in the Gasket Commodity Filter sheet is used to create the unique ID definition of the record. Therefore, you must remove the existing record from the catalog by typing D at the beginning of the record. Then, add a new record with the changes. For example, the new requirement dictates that the 1C0031 specification needs a gasket up to 30 inches in size.

  1. Open the Gasket Commodity Filter sheet.

  2. Locate and copy the record.

  3. Type D at the beginning of the first record.

  4. Edit the second record, and then type A at the beginning of the record.

  5. Bulkload the spreadsheet, and review the log file.

  6. Use the Catalog Checker to review the impact of your proposed changes.

  7. Use the Synchronize Model with Catalog Command to mark the out-of-date objects.

  8. Verify your changes, and resolve any discrepancies.

Edit NPD Range Gasket