Flexible Hose Assembly Rule - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D Piping Reference Data

Language
English
Product
Intergraph Smart 3D
Subproduct
Piping
Search by Category
Reference Data
Smart 3D Version
13

The Flexible Hose Assembly Rule node (the FlexibleHoseAssemblyRule sheet in the FlexibleHoseAssemblyRuleData.xls workbook) defines the reference data needed to route flexible pipe in the Piping task.

Acceptable Alignment Tolerance End 1 (Required)

Enter the maximum angle for mis-alignment at end 1.

Acceptable Alignment Tolerance End 2 (Required)

Enter the maximum angle for mis-alignment at end 2.

End 1 Fitting Commodity Option Code (Optional)

Select the commodity option type for the end 1 fitting.

End 2 Fitting Commodity Option Code (Optional)

Select the commodity option type for the end 2 fitting.

Flexible Hose Topology Type (Required)

Select whether the flexible hose assembly is a radial (1), offset (2), or traveling loop (3) type.

Flexible Hose Assembly Option (Required)

Select the assembly option. This option is defined in the FlexHoseAsmOption select list.

Flexible Hose Assembly Option Category (Required)

Select the assembly option category. This option is defined in the FlexHoseAsmOption select list.

Flexible Hose Assembly Tag (Required)

Enter a name to identify this flexible hose assembly. Users will use this name in the Route Flexible Hose command in Piping to select which flexible hose they want to place.

Flexible Hose Commodity Option Code (Required)

Select the commodity code for the flexible hose.

Maximum Bend Angle (Optional)

Specify the maximum bend angle for flexible hoses in this assembly.

Maximum Bend Radius (Optional)

Specify the maximum bend radius for flexible hoses in this assembly.

Maximum Total Length (Required)

Specify the maximum length for flexible hoses in this assembly.

Minimum Bend Angle (Required)

Specify the minimum bend angle for flexible hoses in this assembly.

Minimum Bend Radius (Required)

Specify the minimum bend radius for flexible hoses in this assembly.

Minimum Bend Tangent Length (Required)

Specify the minimum bend tangent for flexible hoses in this assembly.

Minimum Total Length (Required)

Specify the minimum length for flexible hoses in this assembly.

Nominal Diameter From (Required)

Define the lower bound of the largest nominal piping diameter for which this flexible hose assembly applies.

Nominal Diameter To (Required)

Define the upper bound of the largest nominal piping diameter for which this flexible hose assembly applies.

NPD Unit Type (Required)

Specify the units for the Nominal Diameter From and Nominal Diameter To columns. For example, type in for inches or mm for millimeters.

Round Up Increment Length (Required)

Enter the distance to round up the hose length to. For example, if the hose is 53 1/2 inches and you enter 1 inch here, the hose length will be rounded up to 54 inches.

Spec Name (Required)

Type the name of the piping material class for which you are defining flexible hose assembly data. The piping materials class that you enter must be defined on the Piping Materials Classes.