Define Flared Pipe Information Per Spec - Intergraph Smart 3D - Reference Data - Hexagon PPM

1. Open the Piping.xls workbook.

2. Select the FlaredPipePerSpec sheet.

3. Select a row after the Start keyword but before the End keyword, and click Insert > Row.

4. In the Spec Name column, type the name of your piping materials class.

5. In the Nominal Pipe Diameter column, enter the pipe diameter for which the information applies.

6. In the Schedule Thickness column, enter the schedule thickness for which the information applies.

7. In the Lap Length column, enter the lap length. Be sure to include the units of measure, for example in or mm, when specifying this value.

8. In the Lap Thickness column, enter the lap thickness. Be sure to include the units of measure, for example in or mm, when specifying this value.

9. Save the Piping.xls workbook.

• Refer to the Flared Pipe Per Spec for more information about the columns in this sheet.

• The piping materials class must be defined on the PipingMaterialsClassData sheet.

See Also

Flared Pipe Per Spec