Define Weld Gap Rules - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D Piping Reference Data

PPMProduct
Intergraph Smart 3D
aSubProduct
Piping
PPMCategory_custom
Reference Data
Version_SThreeD_Custom
13
  1. Open the Piping.xls workbook.

  2. Select the WeldGapRule sheet.

  3. Select a row after the Start keyword but before the End keyword, and click Insert > Rows.

  4. In the Spec Name column, type the name of your piping materials class.

  5. In the Weld Type column, type the weld type code.

  6. Define the NPD range for the weld gap.

  7. In the Weld Gap column, type the gap between the welded ends of the welded joint. Be sure to include the units when defining this value, for example, 3mm.

  8. Save the Piping.xls workbook.

  • The piping materials class must be defined on the PipingMaterialsClassData sheet.

  • Valid weld type codes are listed in the AllCodeLists.xls workbook on the WeldType sheet in the Codelist Number column.

See Also

Weld Gap Rule