Exterior Coating and Surface Treatment - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D Piping Reference Data

Language
English (United States)
Product
Intergraph Smart 3D
Subproduct
Piping
Search by Category
Reference Data
Smart 3D Version
13

The Exterior Coating and Surface Treatment Rule node (the OutsideSurfaceTreatment sheet in the Piping Specification.xls workbook) defines the outside coating, surface, and heat treatments based on the piping diameter and piping materials class. This is an optional rule.

Auxiliary Treatment (Optional)

Specify the auxiliary treatment. Valid codes are defined in the AllCodeLists.xls workbook on the AuxiliaryTreatment sheet in the Codelist Number column.

Auxiliary Treatment Requirement (Optional)

Specify if an auxiliary treatment, such as a heat treatment, is required.

Coating Requirement (Optional)

Specify the coating requirement. The coating requirements are defined in the Coating Type select list.

Coating Type (Optional)

Specify the coating type. Valid codes are defined in the AllCodeLists.xls workbook on the CoatingType sheet in the Codelist Number column.

Environmental Zone (Optional)

Specify the environment in which the piping is located. Valid codes are defined in the AllCodeLists.xls workbook on the EnvironmentalZone sheet in the Codelist Number column.

Nominal Piping Diameter From (Required)

Type the lower bound piping diameter for the surface treatment.

Nominal Piping Diameter To (Required)

Type the upper bound piping diameter for the surface treatment.

Nominal Piping Diameter Units (Required)

Specify the units for the Nominal Piping Diameter From and Nominal Piping Diameter To columns. For example, type mm or in.

Outside Surface Treatment Requirement (Optional)

Specify the exterior surface treatment requirement. The exterior surface treatment requirements are defined in the Exterior Surface Treatment select list.

Outside Surface Treatment (Optional)

Specify the exterior surface treatment for the specified piping materials class and piping diameters. Valid codes are defined in the AllCodeLists.xls workbook on the ExteriorSurfaceTreatment sheet in the Codelist Number column.

Spec Name (Required)

Enter the piping materials class name for which you want to define outside surface treatments. The piping material class that you enter must be defined on the Piping Materials Classes.

See Also

Piping Materials Class Rules
Define Outside Surface Treatments