Define Port Alignments Per Spec - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D Piping Reference Data

Language
English
Product
Intergraph Smart 3D
Subproduct
Piping
Search by Category
Reference Data
Smart 3D Version
13
  1. Open the Piping Specification.xls workbook.

  2. Select the PortAlignmentPerSpec sheet.

  3. Select a row after the Start keyword but before the End keyword, and click Insert > Rows.

  4. In the Spec Name column, type the piping materials class name.

  5. Define the nominal piping diameter range for the port alignment that you are defining.

  6. In the End Preparation column, type the end preparation code for the port alignment.

  7. In the Method of Trimming column, enter the code for the method of trimming.

  8. In the Acceptable Alignment Tolerance column, specify the maximum angular variation between the branch centerline and the header centerline.

  9. Save the Piping Specification.xls workbook.

  • The piping materials class must be defined on the PipingMaterialsClassData sheet.

  • Valid end preparation codes are listed in the AllCodeLists.xls workbook on the EndPreparation sheet in the Codelist Number column.

See Also

Port Alignment Per Spec