Define Allowable Bend Angles - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D Piping Reference Data

PPMProduct
Intergraph Smart 3D
aSubProduct
Piping
PPMCategory_custom
Reference Data
Version_SThreeD_Custom
13
  1. Open the Piping Specification.xls workbook.

  2. Select the BendAngles sheet.

  3. Select a row after the Start keyword but before the End keyword, and click Insert > Row.

  4. In the Spec Name column, type the name of your piping materials class.

  5. In the NPD column, type the nominal pipe diameter for which you are defining a bend angle.

  6. In the NPD Unit Type column, type the units for the NPD. For example, type mm or in.

  7. In the Bend Angle column, type the bend angle that you will allow for the NPD.

  8. Save the Piping Specification.xls workbook.

The piping materials class must be defined on the PipingMaterialsClassData sheet.

See Also

Bend Angles