Define Corrosion Allowances - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D Piping Reference Data

Intergraph Smart 3D
Search by Category
Reference Data
Smart 3D Version
  1. Open the Piping Specification.xls workbook.

  2. Select the CorrosionAllowance sheet.

  3. Select a row after the Start keyword but before the End keyword, and click Insert > Row.

  4. In the Spec Name column, type the name of the piping materials class.

  5. In the Materials Category column, enter the materials code for which you are defining corrosion allowance.

  6. In the Fluid Code column, enter the fluid code for which you are defining corrosion allowance.

  7. In the Corrosion Allowance column, specify the corrosion allowance for the specified material and fluid codes. Be sure to include the units of measurement, in or mm, when specifying this value.

  8. Save the Piping Specification.xls workbook.

  • The piping materials class must be defined on the PipingMaterialsClassData sheet.

  • Valid material codes are defined in the AllCodeLists.xls workbook on the MaterialGrade sheet in the Codelist Number column.

See Also

Corrosion Allowance