Define Weld Model Representation Rules - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D Piping Reference Data

Intergraph Smart 3D
Reference Data
  1. Open the Piping Specification.xls workbook.

  2. Select the WeldModelRepresentationRule sheet.

  3. Select a row after the Start keyword but before the End keyword, and click Insert > Rows.

  4. Define nominal piping diameter range for the weld model representation.

  5. In the Weld Class column, type the weld class code.

  6. Specify the weld radius and weld thickness.

  7. Save the Piping Specification.xls workbook.

  • The piping materials class must be defined on the PipingMaterialsClassData sheet.

  • Valid codes are listed in the AllCodeLists.xls workbook on the WeldType sheet in the Codelist Number column.

See Also

Weld Model Representation Rule