Weld Type Rule - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D Piping Reference Data

Language
English
Product
Intergraph Smart 3D
Subproduct
Piping
Search by Category
Reference Data
Smart 3D Version
13

The Weld Type Rule node (the WeldTypeRule sheet in the Piping Specification.xls workbook) specifies the weld type to use based on the fabrication and construction types of the two ends that form the welded joint.

Construction Requirement Of End1 (Required)

Enter the construction requirement code for the first end. Valid codes are listed in the AllCodeLists.xls workbook on the ConstructionType sheet in the Codelist Number column.

Construction Requirement Of End2 (Required)

Enter the construction requirement code for the second end. Valid codes are listed in the AllCodeLists.xls workbook on the ConstructionType sheet in the Codelist Number column.

Fabrication Type Of End1 (Required)

Enter the fabrication type code of the first end. Valid codes are listed in the AllCodeLists.xls workbook on the FabricationType sheet in the Codelist Number column.

Fabrication Type Of End2 (Required)

Enter the fabrication type code of the second end. Valid codes are listed in the AllCodeLists.xls workbook on the FabricationType sheet in the Codelist Number column.

Weld Type (Required)

Enter the weld type code to use. Valid codes are listed in the AllCodeLists.xls workbook on the WeldType sheet in the Codelist Number column.

See Also

Piping Specification Rules
Field Fit Length
Reinforcing Weld Data
Weld Clearance Rule
Weld Gap Rule
Weld Model Representation Rule
Weld Type Rule
Define Weld Type Rules