Define Flared Pipe Information - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D Piping Reference Data

PPMProduct
Intergraph Smart 3D
aSubProduct
Piping
PPMCategory_custom
Reference Data
Version_SThreeD_Custom
13
  1. Open the Piping Specification.xls workbook.

  2. Select the FlaredPipe sheet.

  3. Select a row after the Start keyword but before the End keyword, and click Insert > Row.

  4. In the Nominal Pipe Diameter column, enter the pipe diameter for which the information applies.

  5. In the Schedule Thickness column, enter the schedule thickness for which the information applies.

  6. In the Lap Length column, enter the lap length. Be sure to include the units of measure, for example in or mm, when specifying this value.

  7. In the Lap Thickness column, enter the lap thickness. Be sure to include the units of measure, for example in or mm, when specifying this value.

  8. Save the Piping Specification.xls workbook.

Refer to Flared Pipe for more information about the columns in this sheet.

See Also

Flared Pipe