Define Joint Quality Factors - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D Piping Reference Data

PPMProduct
Intergraph Smart 3D
aSubProduct
Piping
PPMCategory_custom
Reference Data
Version_SThreeD_Custom
13
  1. Open the Piping Specification.xls workbook.

  2. Select the JointQualityFactor sheet.

  3. Select a row after the Start keyword but before the End keyword, and click Insert > Row.

  4. In the Spec Name column, type the name of your piping materials class.

  5. In the Nominal Piping Diameter From column, type the nominal pipe diameter (NPD) that specifies the start of the joint quality factor range.

  6. In the Nominal Piping Diameter To column, type the NPD that specifies the end of the joint quality factor range.

  7. In the NPD Unit Type column, type the units for the NPDs. For example, type mm or in.

  8. In the Joint Quality Factor column, type the joint quality factor, as a percentage, that you want to use for the defined NPD range.

  9. Save the Piping Specification.xls workbook.

The piping materials class must be defined on the PipingMaterialsClassData sheet.

See Also

Joint Quality Factor