Specify Bolt Thread Extensions - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D Piping Reference Data

PPMProduct
Intergraph Smart 3D
aSubProduct
Piping
PPMCategory_custom
Reference Data
Version_SThreeD_Custom
13
  1. Open the Piping Specification.xls workbook.

  2. Select the BoltExtension sheet.

  3. Select a row after the Start keyword but before the End keyword, and click Insert > Row.

  4. In the Nominal Piping Diameter column, type the NPD for which you want to define bolt extensions.

  5. In the Nominal Piping Diameter Units column, type the units for the NPD. For example, type mm or in.

  6. In the Pressure Rating column, type the pressure rating for which you want to define bolt extensions.

  7. In the End Preparation column, type the end preparation code for which you want to define bolt extensions.

  8. In the End Standard column, type the end standard code for which you want to define bolt extensions.

  9. In the Standard Bolt Extension for Studs column, specify the length of exposed threads for studs. Be sure to include the units, in or mm, when specifying this value.

  10. In the Standard Bolt Extension for Machine Bolts column, specify the length of exposed threads for machine bolts. Be sure to include the units, in or mm, when specifying this value.

  11. Save the Piping Specification.xls workbook.

  • Valid end preparation codes are listed in the AllCodeLists.xls workbook on the EndPreparation sheet in the Codelist Number column.

  • Valid end standard codes are listed in the AllCodeLists.xls workbook on the EndStandard sheet in the Codelist Number column.

See Also

Bolt Extension