Define Gasket Commodity Code Substitution - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D Piping Reference Data

Language
English
Product
Intergraph Smart 3D
Subproduct
Piping
Search by Category
Reference Data
Smart 3D Version
13
  1. Open the Connection Parts Commodity Code Substitution.xls workbook.

  2. Select the GasketCommodityCodeSubstRule sheet.

  3. Select a row after the Start keyword but before the End keyword, and click Insert > Row.

  4. In the Contractor Commodity Code column, enter the commodity code for the gasket as defined in the gasket selection filter.

  5. In the Gasket Outside Diameter column, enter the outside diameter of the gasket. Include the units for the diameter. For example, type mm or in.

  6. In the Gasket Inside Diameter column, enter the inside diameter of the gasket. Include the units for the diameter. For example, type mm or in.

  7. In the Gasket Procurement Thickness column, enter the thickness of the gasket. Include the units for the thickness. For example, type mm or in.

  8. In the Gasket Commodity Code column, type the commodity code to use for the material control system.

  9. Save the Connection Parts Commodity Code Substitution.xls workbook, and bulkload the workbook into the catalog.

Optionally, use the Ring Number column to specify the ring number. This property is required only for ring joint gaskets when the gasket's commodity code does not address the ring number.