Define Pipe Branch Fabrication Rule - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D Piping Reference Data

PPMProduct
Intergraph Smart 3D
aSubProduct
Piping
PPMCategory_custom
Reference Data
Version_SThreeD_Custom
13
  1. Open the Sample Data For Reinforced Branches using Implied Pipe Stock.xls workbook.

  2. Select the PipeBranchFabricationRule sheet.

  3. Select a row after the Start keyword but before the End keyword, and click Insert > Row.

  4. In the Spec Name column, type the name of the piping materials class for which you want to specify pipe branch fabrication rule.

  5. Define the pipe branch fabrication rule by providing appropriate values in the different columns.

  6. Save and bulkload the workbook.

  • The piping materials class must be defined on the PipingMaterialsClassData sheet in Piping Specification.xls.

  • The combination of piping material class and the revision number uniquely identify the data for this rule. The revision number should be assigned by the specification writer and is not modified or validated by the system.

  • Refer to the PipeBranchFabricationRule sheet for information about each column in the sheet.

See Also

Pipe Branch Fabrication Rule