Define Port Alignments - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D Piping Reference Data

PPMProduct
Intergraph Smart 3D
aSubProduct
Piping
PPMCategory_custom
Reference Data
Version_SThreeD_Custom
13
  1. Open the Piping Specification.xls workbook.

  2. Select the PortAlignment sheet.

  3. Select a row after the Start keyword but before the End keyword, and click Insert > Rows.

  4. Define the nominal piping diameter range for the port alignment that you are defining.

  5. In the End Preparation column, type the end preparation code for the port alignment.

  6. In the Method of Trimming column, enter the code for the method of trimming.

  7. In the Acceptable Alignment Tolerance column, specify the maximum angular variation between the branch centerline and the header centerline.

  8. Save the Piping Specification.xls workbook.

  • Valid end preparation codes are listed in the AllCodeLists.xls workbook on the EndPreparation sheet in the Codelist Number column.

  • Valid trimming method codes are listed in the AllCodeLists.xls workbook on the MethodsOfTrimming sheet in the Codelist Number column.

See Also

Port Alignment