MaxShapePosition and Bevel Calculation - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Structural Detailing Reference Data

PPMProduct
Intergraph Smart 3D
aSubProduct
Structural Detailing
PPMCategory_custom
Reference Data
Version_SThreeD_Custom
12 (2018)

The bevel value calculation is based on the MaxShapePosition value of the part shape. The default value is 0.

  • If the value is set to 0, the software uses the physical connection bevel properties to make the correction.

  • If the value is set to 1, the part shape is computed to the long point.

  • If the value is set to 2, the part shape is computed to the short point.

The following example shows the effect of MaxShapePosition on part shape manufacturing dimensions.

MaxShapePosition

2

0

1

Part Thickness

10 mm

10 mm

10 mm

Angle N

60°

60°

60°

Angle D

15°

15°

15°

Depth D

7 mm

7 mm

7 mm

Shift

10.25 mm

10.25 mm

10.25 mm

Length

4000 mm

4000 mm

4000 mm

Final Part Length

4330.229 mm

4337.301 mm

4347.550 mm

Bevel Correction Calculations