|
Name |
Description |
Parameters |
|---|---|---|
|
15R_R |
Optional item Radius=15 mm Center Offset and Rotate Angle are used to offset the feature to adjust the physical connection by seam. Parameter Rule: SymbolFileName: |
|
|
Scallop_R |
Optional item Radius=15 mm Parameter Rule: SymbolFileName: |
|
|
15R_S |
Optional item Radius=15 mm Parameter Rule: SymbolFileName: |
|
|
Scallop_S |
Optional item Radius=15 mm Parameter Rule: SymbolFileName: |
|
|
5V_NoChamfer_R |
Default item Radius=5 mm Parameter Rule: SymbolFileName: |
|
|
15V_NoChamfer_R |
Optional item Radius=15 mm Parameter Rule: SymbolFileName: |
|
|
20V_NoChamfer_R |
Optional item Radius=20 mm Parameter Rule: SymbolFileName: |
|
|
LongScallop_NoChamfer_R |
Optional item Radius=5 mm Parameter Rule: SymbolFileName: |
|
|
5V_NoChamfer_S |
Default item Radius=5 mm Parameter Rule: SymbolFileName: |
|
|
15V_NoChamfer_S |
Optional item Radius=15 mm Parameter Rule: SymbolFileName: |
|
|
20V_NoChamfer_S |
Optional item Radius=20 mm Parameter Rule: SymbolFileName: |
|
|
LongScallop_NoChamfer_S |
Optional item Radius=5 mm Parameter Rule: SymbolFileName: |
|
|
5V_Chamfer_R |
Default item Radius=5 mm Parameter Rule: SymbolFileName: |
|
|
15V_Chamfer_R |
Optional item Radius=15 mm Parameter Rule: SymbolFileName: |
|
|
20V_Chamfer_R |
Optional item Radius=20 mm Parameter Rule: SymbolFileName: |
|
|
LongScallop_Chamfer_R |
Optional item Radius=5 mm Parameter Rule: SymbolFileName: |
|
|
5V_Chamfer_S |
Default item Radius=5 mm Parameter Rule: SymbolFileName: |
|
|
15V_Chamfer_S |
Optional item Radius=15 mm Parameter Rule: SymbolFileName: |
|
|
20V_Chamfer_S |
Optional item Radius=20 mm Parameter Rule: SymbolFileName: |
|
|
LongScallop_Chamfer_S |
Optional item Radius=5 mm Parameter Rule: SymbolFileName: |
|
|
Scallop-R1 |
Default item Radius is changed in different cases. Parameter Rule: SymbolFileName: |
|
|
SnipeAtNotch |
Optional item. The part that the edge feature is being placed on is a profile. Parameter Rule: SymbolFileName: |
|
|
Scallop_SR |
Optional item Radius=35 mm Center Offset and Rotate Angle are used to offset the feature to adjust the physical connection by the seam. ThickOffset is used to adjust the seam gap. Parameter Rule: SymbolFileName: |
|
For information on segments, see 
