Shape at Edge Outside - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Structural Detailing Reference Data

Language
English
Product
Intergraph Smart 3D
Subproduct
Structural Detailing
Search by Category
Reference Data
Smart 3D Version
12 (2018)

Value


Bounded Outer Surface Intersects Edge

Bounded Outer Surface Intersects Nothing

Bounded Outer Surface Intersects Corner

No Bounded Flange

None

The purpose is to maintain maximum contact between the bounded and bounding objects.

EdgeToFlange

The purpose is to leave the bounded flange connected, if it exists, and clear material just inside the bounded flange, while leaving the bounded web attached to the bounding edge if there is any overlap. If the overlap is insufficient for the default feature, the answer is not applicable, and no feature should be placed. If there is no flange, it should behave like Edge To Outside.

EdgeToOutside

The purpose is to disconnect the bounded flange, if it exists, and leave part of the bounded web attached to the edge of the bounding flange if there is any overlap. If there is no overlap, then the flange is set back starting at the corner, but no additional material is removed from the web (compare to Corner To Outside).

CornerToFlange

The purpose is to leave the bounded flange connected, if it exists, and disconnect the bounded web from the edge of the bounding edge if there is any overlap. If the overlap is insufficient for the default feature, the answer is not applicable, and no feature should be placed. If there is no flange, it should behave like Corner To Outside.

CornerToOutside

The purpose is to disconnect the bounded flange, if it exists, and disconnect the bounded web from the edge of the bounding edge if there is any overlap.

OutsideToEdge

The purpose is to leave the bounded flange connected, if it exists, and clear material in the immediate vicinity of the bounding corner. If the overlap at the bounding edge is insufficient for the default feature, it should behave like Outside To Outside.

OutsideToFlange

The purpose is to disconnect the bounded flange, if it exists, and clear material in the vicinity of the bounding inside corner. If there is no flange, it behaves like Outside To Outside.

OutsideToOutside

The purpose is to disconnect the bounded flange, if it exists, and clear material in the immediate vicinity of the bounding edge and the outside corner of the bounding edge.