The delivered rules include ten different possibilities for tee welds. Selector questions and the thickness of the bounded part are used to determine which items are valid. Additionally, the mounting angle of the bounded and bounding objects are considered when deciding which tee weld to place. The “Opening” created by the mounting angle is calculated as shown in the following illustration, with the Beta parameter indicating the mounting angle:
Name |
Parameters |
|
---|---|---|
NY |
RootGap=0mm |
|
NNN |
RootGap=0mm |
|
No Bevel |
RootGap=0mm |
|
Y-Flange |
RootGap=0mm BevelAngle and Nose is changed in different cases Special items for end cut, please refer to end cut requirement. |
|
CV |
RootGap=0mm BevelAngle=20deg Nose=6mm Special items for end cut, please refer to end cut requirement. |
|
FN |
RootGap=0mm |
|
FV FV-M |
RootGap=6mm BevelAngle=40deg Nose=2mm |
|
FV45 FV45-M |
RootGap=2mm BevelAngle=45deg Nose=2mm |
|
FK FK-M |
RootGap=2mm BevelAngle=45deg AntiBevelAngle=45deg Nose=2mm |
|
FK3 FK3-M |
RootGap=2mm BevelAngle=45deg AntiBevelAngle=45deg Nose=2mm |