Name |
Description |
Parameters |
---|---|---|
Scallop-R |
Default item Radius is changed in different cases. Center Offset and Rotate Angle are used to offset the Feature. These dimensions are not used in CutEdge case. Parameter Rule: SymbolFileName: |
For details of segments, see How the Straight and Curved Segments Impact the 3D Geometry. |
Scallop-R10 |
Optional item Radius=10 mm Parameter Rule: SymbolFileName: |
|
Scallop-R15 |
Optional item Radius=15 mm Parameter Rule: SymbolFileName: |
|
Scallop-R35 |
Optional item Radius=35 mm Parameter Rule: SymbolFileName: |
|
Scallop-R38 |
Optional item Radius=38 mm Parameter Rule: SymbolFileName: |
|
Scallop-R45 |
Optional item Radius=45 mm Parameter Rule: SymbolFileName: |
|
Scallop-R50 |
Optional item Radius=50 mm Parameter Rule: SymbolFileName: |
|
Scallop-R75 |
Optional item Radius=75 mm Parameter Rule: SymbolFileName: |
|
Scallop-R100 |
Optional item Radius=100 mm Parameter Rule: SymbolFileName: |
|
Scallop-LongR |
Optional item Width=50mm Parameter Rule: SymbolFileName: |
Gap is not displayed because Smart 3D does not use that parameter in this case. |
40XR10 |
Optional item Radius=10mm Parameter Rule: SymbolFileName: |
For more information on segments, see How the Straight and Curved Segments Impact the 3D Geometry. |
30XR5 |
Optional item Radius=5mm Parameter Rule: SymbolFileName: |
|
Type-EC |
Optional item and the part that edge feature is being placed on is a profile. Height=20mm Parameter Rule: SymbolFileName: |
|
EC100x50 |
Optional item Height=20mm Parameter Rule: SymbolFileName: |
|
EC150x50 |
Optional item Height=20mm Parameter Rule: SymbolFileName: |
|
EC300x100 |
Optional item Height=20mm Parameter Rule: SymbolFileName: |
|
EC350x100 |
Optional item Height=20mm Parameter Rule: SymbolFileName: |
|
EC400x200 |
Optional item Height=20mm Parameter Rule: SymbolFileName: |
|
KEW |
Optional item. The part that the edge feature is being placed on is a profile, and the profile length is equal to or greater than 180mm. Height=10mm Other parameters are changed in different cases. Parameter Rule: SymbolFileName: |
|
OVC-A |
Optional item. The part that the edge feature is being placed on is a profile, and the profile length is greater than 350mm. Height=20mm Parameter Rule: SymbolFileName: |
|
OV150x50 |
Height=10mm Parameter Rule: SymbolFileName: |
|
OVC-B |
Optional item. The part that the edge feature is being placed on is a profile, and the profile length is equal to or less than 350mm. Height=20mm Parameter Rule: SymbolFileName: |
|
OVC100x50 |
Height=20mm Parameter Rule: SymbolFileName: |
|
OVC150x50 |
Height=20mm Parameter Rule: SymbolFileName: |
|
OVC200x100 |
Height=20mm Parameter Rule: SymbolFileName: |
|
Type-MR |
Width=320mm Parameter Rule: SymbolFileName: |
|
Type-EA |
Height =85mm Parameter Rule: SymbolFileName: |