Web Cuts for Split Members - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Structural Detailing Reference Data

Language
English (United States)
Product
Intergraph Smart 3D
Subproduct
Structural Detailing
Search by Category
Reference Data
Smart 3D Version
12 (2018)

Creates end-to-end web cuts for collinear members. End cuts are applied to both the bounded and bounding members.

Different web cut shapes are possible by changing the answers to user-questions on the Selection tab in the assembly connection Properties dialog box.

Name

Cross-
Sections Supported

Description

Parameters

MbrSplitWeb_NoAngle

All

A web cut is placed perpendicular to the member axis at the seam location.

MbrSplitWeb_
AngleWebSqFl

All

A web cut is placed at an offset towards bounded and angular to the member axis. Flanges can have a different seam angle.

MbrSplitWeb_
AngleWebSqFl_2

All

A web cut is placed at an offset towards bounding and angular to the member axis. Flanges can have a different seam angle.

MbrSplitWeb_
AngleWebBevelFl

All

A web cut is placed at an offset towards bounded and angular to the member axis. Flanges have a seam angle equal to that of the web.

MbrSplitWeb_
AngleWebBevelFl_2

All

A web cut is placed at an offset towards bounding and angular to the member axis on bounded. Flanges have a seam angle equal to that of the web.

MbrSplitWeb_
AngleWebAngleFl

All

A web cut is placed at an offset towards bounded and angular to the member axis. Flanges can have a different seam angle.

The cutting plane is inclined to the member axis, and the angle of the inclination can be changed using the cutVang parameter.

MbrSplitWeb_
AngleWebAngleFl_2

All

A web cut is placed at an offset towards bounding and angular to the member axis. Flanges can have a different seam angle.

The cutting plane is inclined to the member axis, and the angle of the inclination can be changed using the cutVang parameter.

MbrSplitWeb_
DistWebDistFl

All

A web cut is placed at an offset towards bounded, and slope is controlled through offsets at top and bottom points of the seam.

MbrSplitWeb_
DistWebDistFl_2

All

A web cut is placed at an offset towards bounding, and the slope is controlled through offsets at top and bottom points of the seam.

MbrSplitWeb_
OffsetWebOffsetFl

All

A web cut is placed at an offset and angular to the member axis on bounded. The web, top, and bottom flanges can have different offsets from the original seam.

MbrSplitWeb_
OffsetWebOffsetFl_2

All

A web cut is placed at an offset and angular to the member axis on bounded. The web, top, and bottom flanges can have different offsets from the original seam.

MbrSplitWeb_Tube

Circular sections

A cut is placed at the seam location.