Members - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Structural Detailing Reference Data

Language
English
Product
Intergraph Smart 3D
Subproduct
Structural Detailing
Search by Category
Reference Data
Smart 3D Version
12 (2018)

The following corner feature symbols are delivered in the [Reference Data Product Folder]\SharedContent\Marine Library\Corner Features and [Reference Data Product Folder]\SharedContent\Corner Features folders.

Name

Description

Parameters

Arc Corner Relief

Provides a minimal fit-up clearance at a corner of the bounding edge. When the bounded object is within the bounding object, the corner feature may only be placed at the inside corner. When the bounded object extends outside the bounding object, the corner feature may also be placed on the outside corner.

Corner To Far Face Edge Relief

Clears material from the bounding edge and around one corner. It is typically applied to the inside corner to relieve the outside corner. The reverse is also possible.

This feature is applicable when the bounded object extends outside the bounding object.

Cross Section Scallop

Provides clearance around the fillet between the bounding face and bounding edge.

Cross Section Scallop Along Corner

Provides a constant clearance around the fillet between the bounding face and bounding edge. The cutting direction follows the path of the bounding object.

Cross Section Snipe

Provides clearance around the fillet between the bounding face and bounding edge.

Cross Section Snipe Along Corner

Provides a constant clearance around the fillet between the bounding face and bounding edge. The cutting direction follows the path of the bounding object.

Edge Hook Relief

Disconnects the bounded object from the inside of the bounding edge.

Edge To Face Rathole

Provides welding access to the back side of the bounded flange or web.

This feature is applicable when there is no bounding edge.

Face To Inside Rathole

Provides welding access to the back side of the bounded flange or web. It also disconnects the member from the inside of the bounding edge

This feature is applicable when the inner surface of the bounded flange/web is on, inside, or outside the inner surface of the bounded edge

Fillet Ellipse

Trims the bounded part along the bounding fillet.

In Out Hook Relief

Clears all material from the bounding edge and in the vicinity of both corners.

Inside Face Rathole

Provides welding access to the back side of the bounded flange or web.

This feature is applicable when the inner surface of the bounded flange/web is on, inside, or outside the inner surface of the bounded edge

Outside Hook Relief

Disconnects the bounding object from the bounded edge and the inner surface of the bounding edge, while leaving it connected to the outside face.

This feature is applicable when bounded object extends outside the bounding object.

Short Edge Rathole

Provides welding access to the back side of the bounded flange or web.

This feature is applicable when the inner surface of the bounded flange/web is significantly outside the inner surface of the bounded edge.

Two Edge Rathole

Provides welding access to the back side of the bounded flange or web. It also disconnects the member from the inside of the bounding edge.

Member Radius Snipe

Placed as a child of an end cut.

This feature is applied to the bounded face at the seam or at the intersection of bounding surfaces.

Available in
MbrEndCutCorner

Symbol Filename:
(Corner Features)
RadiusSnipe.sym

Face Rathole

Provides welding access to the inside of the bounded face.

This feature is applied to the bounded face at the seam or at the intersection of bounding surfaces.

Available in
MbrEndCutCorner

Symbol Filename:
(Corner Features)
FaceRathole.sym