Name |
Description |
Figure |
---|---|---|
AxisFlangeStd_F |
Valid boundaries and orientations present only a face to the bounding object. |
|
AxisFlangeStd_ |
Valid boundaries and orientations present only a face to the bounding member. The bounding member is an H-beam or similar. |
|
AxisFlangeStd_ |
Valid boundaries and orientations present only a face to the bounding member. The bounding member is a channel with the flanges up. |
|
AxisFlangeStd_ |
Valid boundaries and orientations present only a face to the bounding member. The bounding member is a channel with the flanges down. |
|
AxisFlangeStd_ |
Valid boundaries and orientations present a face, a top edge, and a bottom edge to the bounding member. |
|
AxisFlangeStd_ |
Valid boundaries and orientations present a face and a bottom edge to the bounding member. |
|
AxisFlangeStd_ |
Valid boundaries and orientations present a face and a top edge to the bounding member. |
|
AxisFlangeStd_ |
Valid boundaries and orientations present a face, top edge, and top face to the bounding member. |
|
AxisFlangeStd_ |
Valid boundaries and orientations present a face, bottom edge, and bottom face to the bounding member. |
|
SnipedSetback |
All with left and right flanges. |
|
StraightStd_LR |
All with left and right flanges. |
|
SnipedStd_LR |
Places snipe feature at top or bottom. |
|
SplitFlangeStd_ |
Places straight cut when members are collinear. |
|
Straight_LR_ |
Places a straight cut. |
|
Straight_LR_ |
Places a straight cut. |
|
StraightCutStd_ |
Places a cut following a bounding curve. |
|
SnipedSetback_ |
Places a cut with left and right flanges. |
|
FlangeTopSnipe |
Places a sniped cut starting at an offset from the top of the bounding member. |
|
FlangeBottom |
Places a sniped cut starting at an offset from the bottom of the bounding member. |
|
BtmFlangeSnipe |
Places a sniped cut starting at an offset from the bottom left edge of the bounding member. |
|
GenericFlange |
Valid boundaries and orientations present a face and bottom edge. |
|
GenericFlange |
Valid boundaries and orientations present a face, bottom edge, and bottom face. |
|
GenericFlange |
Valid boundaries and orientations present a face and top edge. |
|
GenericFlange |
Valid boundaries and orientations present a face, top edge, and bottom edge. |
|
GenericFlange |
Valid boundaries and orientations present a face, top edge, and top face. |
|
GenericFlange |
Valid boundaries and orientations present a face, top edge, bottom edge, top face, and bottom face. |
|
RightSnipeCut_ |
Places a flange cut starting at an offset from the right-sided snipe. |
|
Snipe_Chamfer_ |
Places a flange cut with double-sided nose, chamfer, and snipe cuts. |
|
SnipeCut_LR |
Places a flange cut with double-sided snipe cuts. |