The following procedure explains how to set the routing of a cable based on a predefined route.
-
In Electrical Index, expand the Wiring Equipment > Cables hierarchy.
-
Right-click the required cable and then select Common Properties.
-
On the Cable Common Properties dialog, select the Design Data tab.
-
From the Segregation level list, select an appropriate segregation level that fits the segregation level of the predefined route.
-
In the Cable routing group box, select Define.
-
On the Cable Routing Definition dialog, under Find route, select Predefined Route to search for and use an existing route that has been saved in this plant.
-
On the Find dialog, select Find Now.
-
Select an appropriate predefined route from the Results box and select OK.
If the application does not show any predefined routes in the Results box or if the predefined routs are not suitable, define new routes using the Predefined Routes command. For details, see Create a Predefined Cable Route.