This procedure shows how to generate an all feeder load summary report for the selected PDBs or buses. The software generates the report based on the values that it calculated for the PDBs or buses that were saved to the database after the calculation.
Prior to generating your report, define your report settings on the on the Load Summaries and Reports tab of the Preferences dialog, select the following options:
-
To take into account the coincidence factors, select Compensated values. The calculation results will be multiplied by the coincidence factor of each load or by the coincidence factor of the bus depending on the selected preference option.
-
To ignore coincidence factors, select Uncompensated values. The calculation results will not be multiplied by the coincidence factor of each load or by the coincidence factor of the bus.
-
To display rated electrical consumption, select Rated values. The calculation results will be based on the rated values of the electrical consumption values of the selected load.
-
To display consumed electrical consumption, select Consumed values. The calculation results will be based on the consumed values of the electrical consumption values of the selected load.
Generate the report
-
In the Electrical Index, do one of the following:
-
Select all power distribution boards in your plant.
-
Select the buses or PDBs for which you ran the bus load calculation.
-
-
Select Reports > Plant Reports.
-
On the Plant Reports dialog, select All Feeder Load Summary Report and select OK.
The software takes into account any existing equipment that is connected in parallel.