Create New Plant Circuits Dialog - Intergraph Smart Electrical - Help - Hexagon

Intergraph Smart Electrical Help

Language
English
Product
Intergraph Smart Electrical
Search by Category
Help
Smart Electrical Version
10

This dialog opens automatically when you select or drag a typical CBD that contains typical circuits. The dialog allows you to create new plant circuits according to the typical circuits listed in the dialog. Also, you assign each new plant circuit that will be created to an appropriate PDB, bus, and cell in your plant.

The dialog lists all the typical circuits that are contained in the current typical CBD. You select an appropriate PDB, bus, and cell for each new plant circuit that will be created. If you want to assign a new plant circuit to a free-standing bus, do not select a PDB. Just select PPM All Outputs Graphic in the Plant Bus field to find an appropriate free-standing bus.

You can assign your new plant circuits to appropriate cells, create new cells or skip the cell assignment as needed. To create a new cell, select Create new cell from the Plant Cell list.

Note that if you do not select a bus for a particular typical circuit listed in this dialog, the software will not create a plant circuit for that typical circuit.

The dialog options are as follows:

Typical Circuit

Displays the name of each typical circuit contained in the current typical CBD.

Typical Circuit Type

Displays the type of each typical circuit contained in the current CBD. (For example, Feeder)

Plant PDB

Allows you to select an appropriate plant PDB (by selecting PPM All Outputs Graphic) to which you want to assign the new plant circuit.

Plant Bus

If you have selected a plant PDB, allows you to select an appropriate plant bus to which you want to assign the new plant circuit. If you chose not to select a PDB, select PPM All Outputs Graphic to select a free-standing bus.

Plant Cell

Allows you to select an appropriate cell or create a new one.

OK

Closes this dialog and creates the plant circuits that will also be placed on the new CBD drawing.

Clear

Clears the PDB, bus and cell selection that you have made for the selected typical circuit.