Associated Items Tab (Circuit Common Properties Dialog) - Intergraph Smart Electrical - Help - Hexagon

Intergraph Smart Electrical Help

Language
English
Product
Intergraph Smart Electrical
Search by Category
Help
Smart Electrical Version
10

Provides optional information for signals and internal items associated with the circuit. Also, allows to associate a lookup table with a circuit internal component.

Associated loads

Displays the list of loads that are associated with the circuit. It is possible to display only those loads that are associated directly with the current circuit (this is the default option) or all the loads associated downstream with the current circuit.

Item Tag

Displays the item tag for the associated load.

Type

Displays the electrical equipment item type of the associated load, for example, motor, heater.

Show only loads associated directly

Displays in the Associated loads box only those loads that are connected directly to the current circuit. (This is the default setting.)

Show all loads associated downstream

Displays in the Associated loads box all the loads that are connected downstream to the current circuit. Note that the application resets the selection to the default option after reopening this dialog.

After selecting this option, the software retrieves all the downstream loads that are associated with the current circuit. If this electrical network branch is long, it can take a long time to retrieve all the data.

Circuit signals

Describes all the signals that are associated with the circuit.

Item Tag

Displays the signal tag for the associated circuit signal.

Equipment Type

Displays the equipment type of the item that the signal originates from.

Description

Displays a description of the associated I/O signal.

I/O Type

Displays the signal I/O type according to whether the signal is an input or an output, and whether the signal type is analog or digital.

Loop Number

Displays the loop number, if one exists, for signal data that you retrieved from Smart Instrumentation.

Associated cables

Describes all the cables that are associated with the circuit.

Reference Cable

Displays the reference cable for the cable associated with the circuit.

Specification

Indicates the family of cables to which the cable belongs.

Cable Formation

Displays the cable formation (number and size of conductors) for the cable.

Circuit internals

Displays details of the components in the selected circuit. The values are read-only.

To update the circuit components, you need to modify the selected circuit in the Electrical Index.

Component Type

Displays the type of component in the circuit, such as a circuit breaker or a fuse.

Component Tag

Displays the component identifying tag, as shown in the Electrical Index.

Lookup Table

Allows you to select a lookup table that you want to associate with an internal component of a circuit. You will then be able to apply this associated lookup table to a project circuit when you run the Apply Lookup Tables feature on the Apply Options dialog to propagate the lookup table data to the circuit internal components.

Order

Determines the position of the component in relation to the bus when the circuit contains more than one component. The greater the value, the further the component is from the bus.

Show in SLD

Indicates whether the software shows a graphical representation of the component when you generate a single line diagram for the PDB.

Add

Opens the Add Internal Item dialog to enable you to add new internal components for the circuit.

Move Out

Allows you to move a circuit internal out of the circuit and place it under the circuit in the Electrical Engineer as stand-alone disconnect equipment. It is only possible to move out an internal whose Order value in the Circuit internals pane is 1.

Remove

Removes the currently selected component from the circuit.