Create a Blank Plant CBD - Intergraph Smart Electrical - Help - Hexagon

Intergraph Smart Electrical Help

Language
English
Product
Intergraph Smart Electrical
Search by Category
Help
Smart Electrical Version
10

This procedure explains how to create a blank cable block diagram where you can place the electrical items that you require and make all the necessary associations and connections.

  1. In the Electrical Index open the Documents folder.

  2. Right-click the Cable Block Diagrams folder, and on the shortcut menu, select New Cable Block Diagram.

  3. Right-click the new cable block diagram and then select Document Properties.

  4. On the Document Properties dialog, under Document number, type a name of up to 80 characters for the new typical CBD.

  5. Select in the Description box and type a brief description if needed.

  6. From the Template name, select an appropriate drawing template.

  7. To filter the display of cables in the CBD, select the appropriate check boxes under Display cable types in cable block diagrams.

  8. Select OK.

  9. Place the required items on the new drawing.

    SHARED Tip In addition to smart graphics, you can also add auxiliary graphics, redlining, and annotations to your CBD. See Working with Smart Data and Auxiliary Graphics in a CBD. After you save the drawing, the software retains all your additions and modifications.

  10. When done, select Save PPM All Outputs Graphic on the main toolbar before closing the drawing.

For more information, see Working with Smart Data and Auxiliary Graphics in a CBD.