This option allows you synchronize the glands on selected plant cables with the glands on the reference cables associated with each of the selected plant cables.
-
In the Electrical Index, expand the Wiring Equipment > Cables hierarchy and then select one of the cable type folders.
-
In the List View pane of the Electrical Index, select the cables that you require (use the CTRL or SHIFT key to select multiple cables).
-
On the Smart Electrical menu bar, select Actions > Cables >Synchronize Gland Associations.
-
On the Synchronize Gland Associations dialog, under Synchronize, select one of the following options that determines the side of the cables on which you want to synchronize the glands with the glands on the associated reference cables:
-
Glands on both cable sides — Synchronizes the glands on both sides of the selected cables.
-
Glands on the "To" cable sides — Synchronizes the glands on the "To" side of the selected cables.
-
Glands on the "From" cable sides — Synchronizes the glands on the "From" side of the selected cables.
-
-
In the Cable data section, select the cables that you want to be included in the synchronization process.
Make your cable selection as follows:
-
To select a single cable, select the check box beside the required cable in the data window.
-
To select all the cables in the data window, select the Select cables check box below the data window.
-
To clear the selection of all the cables, select the Select cables arrow and select None.
-
To select all the cables that do not have any glands, select All cables without glands.
-
To select all the cables whose glands are different from the glands on their associated reference cables, select All cables with different glands.
-
-
Select OK to start the synchronization process.
-
The software synchronizes the glands with the glands of each reference cable that is associated with the selected plant cables.
-
The Filter cable criteria options are disabled since you have selected the required cables in the Electrical Index.
-
The Show Cable Data button is also disabled as the software populates the Cable data grid automatically.