Provides optional information for control stations that control the motor operation, and controls and signals for a motor.
Associated control stations
Displays a list of control stations associated with the motor. This information is read-only and appears either if you associated a control station with the motor from the Control Station Common Properties dialog or if you applied a profile defined in the Reference Data Explorer.
Item Tag
Displays the control station tag for the associated control station.
Type
Displays the reference control station when you create the associated plant control station by copying a reference control station from the Reference Data Explorer. For a control station that you created in the Electrical Index, no value appears in this column.
Associated I/O signals
Describes all the I/O signals that are associated with the motor where the signals need monitoring or operation at the PLC / DCS.
Item Tag
Displays the signal tag for the associated I/O signal.
Equipment Type
Displays the equipment type of the item that the signal originates from, which can be the motor, an associated circuit, or a control station.
Description
Displays a description of the associated I/O signal.
I/O Type
Displays the signal I/O type according to whether the signal is an input or an output, and whether the signal type is analog or digital.
Loop Number
Displays the loop number, if one exists, for signal data that you retrieved from Smart Instrumentation.
Last applied typical I/O set
Indicates the last typical I/O set of signals that you applied to the motor, if appropriate. This information is read-only and appears only if you apply a typical I/O set by dragging it from the Reference Data Explorer or by applying options to the motor.
Controller
Provides controller details in the case where there is a device that controls the motor operation.
Type of controller
Describes the controller mechanism. Examples of controller mechanisms are solid-state relay (SSR), silicon controlled rectifier (SCR), and electronic.
Variable frequency drive
Select this check box if the controller is a variable-frequency drive.
Restart options
Auto restart
Select the required option to indicate whether motor restart after a power outage is automatic or manual.
Restart group
Select the group of motors to which the motor belongs when restarting. After a power outage, the motors restart in groups, rather than all together, to avoid overloading the network.
Manage Operating Cases
Opens the Manage Operating Cases dialog where you can add, edit, or delete property values specific to various plant operating cases that exist for the current plant item.