The following code-based values are typically used as material properties.
Material Name
Type an allowed external pressure chart name. The software uses the chart name to calculate the B value for all external pressure and buckling calculations. If you type a valid value for Material Name, the software will look into its database and determine the external pressure chart name for this material and enter it into this cell. The program will also determine this chart name when you select a material name from the material selection window.
Carbon Steel
|
CS-1 |
Carbon and Low Alloy Sy<30000 |
|
CS-2 |
Carbon and Low Alloy Sy>30000 |
|
CS-3 |
Carbon and Low Alloy Sy<38000 |
|
CS-4 |
SA-537 |
|
CS-5 |
SA-508, SA-533, SA-541 |
|
CS-6 |
SA-562 or SA-620 |
Heat-Treated Steel
|
HT-1 |
SA-517 and SA-592 A, E, and F |
|
HT-2 |
SA-508 Cl. 4a, SA-543,B,C |
Stainless Steel (High Alloy)
|
HA-1 |
Type 304 |
|
HA-2 |
Type 316, 321, 347, 309, 310, 430B |
|
HA-3 |
Type 304L |
|
HA-4 |
Type 316L, 317L |
|
HA-5 |
Alloy S31500 |
Non-Ferrous Material
|
NFA-1 |
AL3003, O and H112 |
|
NFA-2 |
AL3003, H20 |
|
NFA-3 |
AL3004, O and H112 |
|
NFA-4 |
AL3004, H34 |
|
NFA-5 |
AL5154, O and H112 |
|
NFA-6 |
C62000 (Aluminum Bronze) |
|
NFA-7 |
AL1060, O |
|
NFA-8 |
AL5052, O and H112 |
|
NFA-9 |
AL5080, O and H112 |
|
NFA-10 |
AL5456, O |
|
NFA-11 |
AL5083, O and H112 |
|
NFA-12 |
AL6061, T6, T651, T6510 and T6511 |
|
NFA-13 |
AL6061, T4, T451, T4510 and T4511 |
|
NFA-20 |
AL5454, O and H112 |
|
NFC-1 |
Annealed Copper |
|
NFC-2 |
Copper Silicon A and C |
|
NFC-3 |
Annealed 90-10 Copper Nickel |
|
NFC-4 |
Annealed 70-30 Copper Nickel |
|
NFC-5 |
Welded Copper Iron Alloy Tube |
|
NFC-6 |
SB-75 and SB-111 Copper Tube |
|
NFN-1 |
Low Carbon Nickel |
|
NFN-2 |
Ni |
|
NFN-3 |
Ni Cu Alloy |
|
NFN-4 |
Annealed Ni Cr Fe |
|
NFN-5 |
Ni Mo Alloy B |
|
NFN-6 |
Ni Mo Cr Fe |
|
NFN-7 |
Ni Mo Cr Fe Cu |
|
NFN-8 |
Ni Fe Cr Alloy 800 |
|
NFN-9 |
Ni Fe Cr Alloy 800H |
|
NFN-10 |
Ni Moly Chrome Alloy N10276 |
|
NFN-11 |
Ni Cr Fe Mo Cu Alloys G and G-2 |
|
NFN-12 |
Cr Ni Fe Mo Cu Co, SB-462, 463, and so on. |
|
NFN-13 |
Ni Fe Cr Si Alloy 330 |
|
NFN-20 |
Ni Cr Mo Grade C-4 |
|
NFN-15 |
Ni Mo Alloy X |
|
NFN-16 |
Ni Mo Alloy B2 |
|
NFN-17 |
Ni Cr Mo Co N06625 (Alloy 625) |
|
NFN-18 |
Ni Mo Cr Fe Cu (Grade G3) |
|
NFN-19 |
Ni Mo Cr Fe Cu (Grade G3, >3/4) |
|
NFN-20 |
Work Hardened Nickel |
|
NFT-1 |
Unalloyed Titanium, Grade 1 |
|
NFT-2 |
Unalloyed Titanium, Grade 2 |
|
NFT-3 |
Titanium, Grade 1 |
|
NFZ-1 |
Zirconium, Alloy 702 |
|
NFZ-2 |
Zirconium, Alloy 705 |
Elastic Modulus Reference #
The elastic modulus reference number is a value that points to or corresponds to a set of data set forth in ASME Section II Part D, tables TM-1, 2 and so on. Unfortunately, many materials have a composition or UNS number that does not match the criteria of what is supplied in the ASME Code. In these cases, the reference number will be brought in as zero. If this happens, you will need to enter in an appropriate value.
|
Ref. # |
Table |
Material Designation or UNS Number |
|
|---|---|---|---|
|
1 |
TM-1 |
Carbon Steels with C<= 0.3% |
|
|
2 |
TM-1 |
Carbon Steels with C> 0.3% |
|
|
3 |
TM-1 |
Material Group A |
|
|
4 |
TM-1 |
Material Group B |
|
|
5 |
TM-1 |
Material Group C |
|
|
6 |
TM-1 |
Material Group D |
|
|
7 |
TM-1 |
Material Group E |
|
|
8 |
TM-1 |
Material Group F |
|
|
9 |
TM-1 |
Material Group G |
|
|
10 |
TM-1 |
S13800 |
|
|
11 |
TM-1 |
S15500 |
|
|
12 |
TM-1 |
S45000 |
|
|
13 |
TM-1 |
S17400 |
|
|
14 |
TM-1 |
S17700 |
|
|
15 |
TM-1 |
S66286 |
|
|
16 |
TM-2 |
A03560 |
|
|
17 |
TM-2 |
A95083 |
|
|
18 |
TM-2 |
A95086 |
|
|
19 |
TM-2 |
A95456 |
|
|
20 |
TM-2 |
A24430 |
|
|
21 |
TM-2 |
A91060 |
|
|
22 |
TM-2 |
A91100 |
|
|
23 |
TM-2 |
A93003 |
|
|
24 |
TM-2 |
A93004 |
|
|
25 |
TM-2 |
A96061 |
|
|
26 |
TM-2 |
A96063 |
|
|
27 |
TM-2 |
A92014 |
|
|
28 |
TM-2 |
A92024 |
|
|
29 |
TM-2 |
A95052 |
|
|
30 |
TM-2 |
A95154 |
|
|
31 |
TM-2 |
A95254 |
|
|
32 |
TM-2 |
A95454 |
|
|
33 |
TM-2 |
A95652 |
|
|
34 |
TM-3 |
C93700 |
|
|
35 |
TM-3 |
C83600 |
|
|
36 |
TM-3 |
C92200 |
|
|
37 |
TM-3 |
C28000 |
|
|
38 |
TM-3 |
C36500 |
|
|
39 |
TM-3 |
C46400 |
|
|
40 |
TM-3 |
C65500 |
|
|
41 |
TM-3 |
C66100 |
|
|
42 |
TM-3 |
C95200 |
|
|
43 |
TM-3 |
C95400 |
|
|
44 |
TM-3 |
C44300 |
|
|
45 |
TM-3 |
C44400 |
|
|
46 |
TM-3 |
C44500 |
|
|
47 |
TM-3 |
C64200 |
|
|
48 |
TM-3 |
C68700 |
|
|
49 |
TM-3 |
C10200 |
|
|
50 |
TM-3 |
C10400 |
|
|
51 |
TM-3 |
C10500 |
|
|
52 |
TM-3 |
C10700 |
|
|
53 |
TM-3 |
C11000 |
|
|
54 |
TM-3 |
C12000 |
|
|
55 |
TM-3 |
C12200 |
|
|
56 |
TM-3 |
C12300 |
|
|
57 |
TM-3 |
C12500 |
|
|
58 |
TM-3 |
C14200 |
|
|
59 |
TM-3 |
C23000 |
|
|
60 |
TM-3 |
C61000 |
|
|
61 |
TM-3 |
C61400 |
|
|
62 |
TM-3 |
C65100 |
|
|
63 |
TM-3 |
C70400 |
|
|
64 |
TM-3 |
C19400 |
|
|
65 |
TM-3 |
C60800 |
|
|
66 |
TM-3 |
C63000 |
|
|
67 |
TM-3 |
C70600 |
|
|
68 |
TM-3 |
C97600 |
|
|
69 |
TM-3 |
C71000 |
|
|
70 |
TM-3 |
C71500 |
|
|
71 |
TM-4 |
N02200 |
|
|
72 |
TM-4 |
N02201 |
|
|
73 |
TM-4 |
N04400 |
|
|
74 |
TM-4 |
N04405 |
|
|
75 |
TM-4 |
N06002 |
|
|
76 |
TM-4 |
N06007 |
|
|
77 |
TM-4 |
N06022 |
|
|
78 |
TM-4 |
N06030 |
|
|
79 |
TM-4 |
N06045 |
|
|
80 |
TM-4 |
N06059 |
|
|
81 |
TM-4 |
N06230 |
|
|
82 |
TM-4 |
N06455 |
|
|
83 |
TM-4 |
N06600 |
|
|
84 |
TM-4 |
N06617 |
|
|
85 |
TM-4 |
N06625 |
|
|
86 |
TM-4 |
N06690 |
|
|
87 |
TM-4 |
N07718 |
|
|
88 |
TM-4 |
N07750 |
|
|
89 |
TM-4 |
N08020 |
|
|
90 |
TM-4 |
N08031 |
|
|
91 |
TM-4 |
N08330 |
|
|
92 |
TM-4 |
N08800 |
|
|
93 |
TM-4 |
N08801 |
|
|
94 |
TM-4 |
N08810 |
|
|
95 |
TM-4 |
N08825 |
|
|
96 |
TM-4 |
N10001 |
|
|
97 |
TM-4 |
N10003 |
|
|
98 |
TM-4 |
N10242 |
|
|
99 |
TM-4 |
N10276 |
|
|
100 |
TM-4 |
N10629 |
|
|
101 |
TM-4 |
N10665 |
|
|
102 |
TM-4 |
N10675 |
|
|
103 |
TM-4 |
N12160 |
|
|
104 |
TM-4 |
R20033 |
|
|
105 |
TM-5 |
R50250 |
|
|
106 |
TM-5 |
R50400 |
|
|
107 |
TM-5 |
R50550 |
|
|
108 |
TM-5 |
R52400 |
|
|
109 |
TM-5 |
R56320 |
|
|
110 |
TM-5 |
R52250 |
|
|
111 |
TM-5 |
R53400 |
|
|
112 |
TM-5 |
R52402 |
|
|
113 |
TM-5 |
R52252 |
|
|
114 |
TM-5 |
R52404 |
|
|
115 |
TM-5 |
R52254 |
|
|
116 |
TM-5 |
R60702 |
|
|
117 |
TM-5 |
R60705 |
|
|
118 |
TM-1 |
12Cr-13Cr Group F |
|
|
119 |
TM-1 |
Material Group G |
|
|
120 |
TM-1 |
Material Group H |
|
|
121 |
TM-1 |
Material Group I |
|
|
122 |
TM-1 |
Material Group J |
|
|
123 |
TM-4 |
N06686 |
|
|
124 |
TM-5 |
R56323 |
|
|
220 |
TEMA |
Ni-Mo Alloy B |
|
|
221 |
TEMA |
Tantalum |
|
|
222 |
TEMA |
Tantalum with 2.5% Tungsten |
|
|
223 |
TEMA |
7 MO (S32900) |
|
|
224 |
TEMA |
7 MO PLUS (S32950) |
|
|
225 |
TEMA |
17-19 CR Stn Steel |
|
|
226 |
TEMA |
AL-6XN Stn Steel (NO8367) |
|
|
227 |
TEMA |
AL-29-4-2 |
|
|
228 |
TEMA |
SEA-CURE |
|
|
229 |
TEMA |
2205 (S31803) |
|
|
230 |
TEMA |
3RE60 (S31500) |
Thermal Expansion Coefficient Reference #
|
Reference Number |
Table |
Description/UNS Number |
|---|---|---|
|
1 |
TE-1 |
Carbon & Low Alloy Steels, Group 1 |
|
2 |
TE-1 |
Low Alloy Steels, Group 2 |
|
3 |
TE-1 |
5Cr-1Mo and 29Cr-7Ni-2Mo-N Steels |
|
4 |
TE-1 |
9Cr-1Mo |
|
5 |
TE-1 |
5Ni-¼4Mo |
|
6 |
TE-1 |
8Ni and 9Ni |
|
7 |
TE-1 |
12Cr,13Cr and 13Cr-4Ni Steels |
|
8 |
TE-1 |
15Cr and 17Cr Steels |
|
9 |
TE-1 |
27Cr Steels |
|
10 |
TE-1 |
Austenitic Group 3 Steels |
|
11 |
TE-1 |
Austenitic Group 4 Steels |
|
12 |
TE-1 |
Ductile Cast Iron |
|
13 |
TE-1 |
17Cr-4Ni-4Cu, Condition 1075 |
|
14 |
TE-1 |
17Cr-4Ni-4Cu, Condition 1150 |
|
15 |
TE-2 |
Aluminum Alloys |
|
16 |
TE-3 |
Copper Alloys C1XXXX Series |
|
17 |
TE-3 |
Bronze Alloys |
|
18 |
TE-3 |
Brass Alloys |
|
19 |
TE-3 |
70Cu-30Ni |
|
20 |
TE-3 |
90Cu-10Ni |
|
21 |
TE-4 |
N02200 and N02201 |
|
22 |
TE-4 |
N04400 and N04405 |
|
23 |
TE-4 |
N06002 |
|
24 |
TE-4 |
N06007 |
|
25 |
TE-4 |
N06022 |
|
26 |
TE-4 |
N06030 |
|
27 |
TE-4 |
N06045 |
|
28 |
TE-4 |
N06059 |
|
29 |
TE-4 |
N06230 |
|
30 |
TE-4 |
N06455 |
|
31 |
TE-4 |
N06600 |
|
32 |
TE-4 |
N06625 |
|
33 |
TE-4 |
N06690 |
|
34 |
TE-4 |
N07718 |
|
35 |
TE-4 |
N07750 |
|
36 |
TE-4 |
N08031 |
|
37 |
TE-4 |
N08330 |
|
38 |
TE-4 |
N08800,N08801,N08810,N08811 |
|
39 |
TE-4 |
N08825 |
|
40 |
TE-4 |
N10001 |
|
41 |
TE-4 |
N10003 |
|
42 |
TE-4 |
N10242 |
|
43 |
TE-4 |
N10276 |
|
44 |
TE-4 |
N10629 |
|
45 |
TE-4 |
N10665 |
|
46 |
TE-4 |
N10675 |
|
47 |
TE-4 |
N12160 |
|
48 |
TE-4 |
R20033 |
|
49 |
TE-5 |
Titanium Gr 1,2,3,7,11,12,16 and 17 |
|
50 |
TE-5 |
Titanium Grade 9 |
|
51 |
TEMA |
5Cr-1/2Mo |
|
52 |
TEMA |
7Cr-1/2Mo & 9Cr-1Mo |
|
53 |
TEMA |
Ni-Mo (Alloy B) |
|
54 |
TEMA |
Nickel (Alloy 200) |
|
55 |
TEMA |
Copper-Silicon |
|
56 |
TEMA |
Admiralty |
|
57 |
TEMA |
Zirconium |
|
58 |
TEMA |
Cr-Ni-Fe-Mo-Cu-Cb (Alloy 20Cb) |
|
59 |
TEMA |
Tantalum |
|
60 |
TEMA |
Tantalum with 2.5% Tungsten |
|
61 |
TEMA |
17-19 CR (TP 439) |
|
62 |
TEMA |
AL-6XN |
|
63 |
TEMA |
2205 (S31803) |
|
64 |
TEMA |
3RE60 (S31500) |
|
65 |
TEMA |
7 MO (S32900) |
|
66 |
TEMA |
7 MO PLUS (S32950) |
|
67 |
TEMA |
AL 29-4-2 |
|
68 |
TEMA |
SEA-CURE |
|
69 |
TEMA |
80-20 Cu-Ni (C71000) |
Minimum Thickness (in.)
Type the minimum allowable thickness for the material. If the material has no minimum thickness, type -1.
Maximum Thickness (in.)
Type the maximum allowable thickness for the material. If the material has no maximum thickness, type -1.
Creep Temperature (F)
Type the temperature at which the material is governed by time dependent properties.
MDMT Exemption Temperature (F)
When the material uses an impact tested product specification, type the impact temperature. Otherwise, type 1.
Product Form
Type an integer that designates the product form of the material.
|
Form |
Product Form |
|
1 |
Plate |
|
2 |
Forgings |
|
3 |
Seamless pipe |
|
4 |
Welded pipe |
|
5 |
Welded tube |
|
6 |
Seamless tube |
|
7 |
Bolting |
|
8 |
Castings |
|
9 |
Fittings |
|
10 |
Seamless/welded pipe |
|
11 |
Seamless/welded tube |
|
12 |
reserved |
|
13 |
Seamless pipe and tube |
|
14 |
Pipe |
|
15 |
Bar |
|
16 |
Sheet |
|
17 |
Tube |
|
18 |
Forged pipe |
|
19 |
Seamless/welded fitting |
|
20 |
Drawn seamless tube |
|
21 |
Condenser & heat exchanger tubes |
|
22 |
Seamless extruded tube |
|
23 |
Rod |
|
24 |
Seamless and welded fittings |
|
25 |
Welded fittings |
|
26 |
Seamless fittings |
|
27 |
Finned tube |
|
28 |
Seamless U-bend tube |
|
29 |
Welded condenser tube |
Impact Reduction Temperature (F)
When the material is eligible for a -5ºF temperature reduction according to UCS-66(g), type -5. Otherwise, type 0.
Material Band
The material band is used to determine the modulus of elasticity and coefficient of thermal expansion for that type of material.
|
Material |
Basic Material Type/composition |
|
M0 |
Carbon steel |
|
M1 |
Carbon manganese steel |
|
M2 |
Carbon molybdenum steel |
|
M4 |
Low alloy MG Cr Mo V steel |
|
M5 |
3.5Ni |
|
M6 |
9Ni |
|
M7 |
1-1.5Cr .5Mo |
|
M8 |
.5Cr .5Mo .25V |
|
M9 |
2.25Cr 1Mo |
|
M10 |
5Cr .5Mo |
|
M11 |
9Cr1Mo |
|
M12 |
12Cr1Mo1V |