Enter the design length of the short side of the vessel. This dimension is dependent on the vessel being analyzed as indicated in the following table:
A1 |
H - Inside length of long-side of vessel |
A2 |
h - Inside length of long-side of vessel |
A3 |
L1 - Half-length of short-side minus the corner radius |
A4 |
H - Inside length of short-side of vessel |
A5 |
L3 - Half-length of short-side of vessel |
A6 |
L3 - Half-length of short-side of vessel |
A7 |
h - Inside length of short-side of vessel |
A7-B |
h - Inside length of short-side of vessel |
A8 |
h - Inside length of short-side of vessel |
A8-B |
h - Inside length of short-side of vessel |
B1 |
2R - Inside Diameter of Rounded Short-side |
B2 |
2R - Inside Diameter of Rounded Short-side |
B3 |
2R - Inside Diameter of Rounded Short-side |
B3-B |
2R - Inside Diameter of Rounded Short-side |
C1 |
*** No Entry Required *** |