General Tab (Cableway Along Leg Feature Properties Dialog) - Intergraph Smart 3D - Help

Intergraph Smart 3D Electrical

Language
English
Product
Intergraph Smart 3D
Subproduct
Electrical
Search by Category
Help
Smart 3D Version
11 (2016)
SmartPlant Foundation / SDx Version
10

Displays and defines the general properties of the selected cableway along-leg feature.

Standard

Cableway

Specifies the name of the cableway run associated with the feature.

Specification

Determines the specification assigned to the feature.

Angle

Sets the angle of the along-leg feature.

Part

Allows you to select a part associated with the feature, if applicable.

Maintenance Volume

A maintenance volume is space reserved for installing and maintaining cables in a cable tray and can be defined at the cableway level and optionally overridden at the feature level. You can also define maintenance volumes for duct banks to reserve space for a mud mat below the duct bank. Use the Format > View command to turn on the Maintenance aspect so you can see the maintenance volumes in the model.

Maintenance Volume Properties Option

Select Use Run Properties to use the maintenance volume properties defined for the parent run. Select Default Feature Properties to define maintenance volume settings that are unique for this feature. This option is only available when editing the properties of a feature.

Maintenance Shape

Specifies the maintenance volume shape: Rectangle, Round, or Flat Oval.

Maintenance Diameter

Specifies the diameter of the maintenance volume. This option is only available when Maintenance Shape is set to Round.

Maintenance Width

Specifies the width of the maintenance volume. This option is only available when Maintenance Shape is set to Rectangle or Flat Oval.

Maintenance Depth

Specifies the depth of the maintenance volume. This option is only available when Maintenance Shape is set to Rectangle or Flat Oval.

Maintenance Justification

Specifies how the maintenance volume (gray box below) aligns with the feature (blue cross section below). There are ten options available: (1) Top Left, (2) Top Center, (3) Top Right, (4) Center Left, (5) Center Center, (6) Center Right, (7) Bottom Left, (8) Bottom Center, (9) Bottom Right, and User Defined.

Maintenance Width Offset

Specifies the width offset distance. This option is only available when Maintenance Justification is set to User Defined.

Maintenance Depth Offset

Specifies the depth offset distance. This option is only available when Maintenance Justification is set to User Defined.

Fill Information

Percent Fill

Specifies the percent cable fill in the cableway feature.