Move a set of conduit features - Intergraph Smart 3D - Help

Intergraph Smart 3D Electrical

Language
English
Product
Intergraph Smart 3D
Subproduct
Electrical
Search by Category
Help
Smart 3D Version
11 (2016)
SmartPlant Foundation / SDx Version
10
  1. Click Select on the vertical toolbar.

  2. In the Locate Filter, select Conduit Features.

  3. Select a feature on the conduit section to move.

  4. Right-click the feature, and select an option under Route Selection Commands > Get Features.

  5. Click Move on the main ribbon.

    If you move the conduit end within ¼ inch (6.35 mm) of another conduit run end, the software automatically connects the two ends.

  6. Select a move-from point.

  7. Identify the move-to point, and click the graphic view to move the conduit to the new location.

See Moving at Boundary Connections for information on how the software performs the move operation.

Connect a Set of Conduit Features

  1. Click Select on the vertical toolbar.

  2. In the Locate Filter, select Conduit Features.

  3. Select a feature in the conduit section to modify.

  4. Right-click the feature, and select an option under Route Selection Commands > Get Features.

  5. Click Move on the main ribbon.

  6. Click an end feature in the selection.

  7. Click an open end feature to connect the selection to another conduit inline. Alternatively, click a straight feature to connect the selection to another conduit at a branch point.

The software lengthens or shortens the conduit run length as needed to make the connection. See Connecting conduit runs using Move.