Barriers Tab (New Cableway Dialog) - Intergraph Smart 3D - Help

Intergraph Smart 3D Electrical

Language
English
Product
Intergraph Smart 3D
Subproduct
Electrical
Search by Category
Help
Smart 3D Version
11 (2016)
SmartPlant Foundation / SDx Version
10

Displays and defines properties of any barriers included in the cable tray. To define cable tray barriers, you must select the appropriate Specification and enter the Number Of Barriers on the General tab of the New Cableway dialog.

Select Item for Modification

Select the partition created by the barrier that you want to modify. To assist you in locating the correct partition, the cableway symbol at the bottom of the dialog highlights the partition selected.

Go to Defaults

Resets all partitions or cable trays to default settings.

Delete Barrier

Deletes the selected barrier from the cable tray.

Add Barrier

Adds a new barrier to the cable tray.

<CableTray Properties>

Indicates that you are modifying the main cableway.

CableTray Width

Specifies the width of the entire cable tray.

CableTray Depth

Specifies the depth of the entire cable tray.

Default Cableway Spec

Specifies the specification to be used as the default.

Default Minimum Cableway Barrier Width

Specifies the minimum width value for the barrier/divider. The partitions are symmetrical until you change them.

<CableWay1 Properties>

Indicates that you are modifying the first new partition. Select <CableWay2 Properties> to select the second partition, and so forth.

CableWay Run

Select the cableway to which you want to attach this particular partition.

CableWay Run Name

Accept the default name or enter a name for the cableway run.

Cableway Spec

Displays the specification of the enclosing cableway. This option is read-only.

Offset Along Width Direction

You cannot change this value for Cableway 1. However, it can be modified for the other partitions.

Fill Efficiency

Specifies the percentage cable fill capacity for the partition.

Signal Type

Enter the signal type of the cable for this particular partition.

Voltage Grade

Enter the voltage grade of the cable for this particular partition.

Preview

Illustrates the number of barriers in the cable tray and the number of resulting partitions. Additional highlighting displays when you select an item for modification. (See the red lines in the following illustration.) The reference point in the lower left corner of the preview is indicated by a blue handle in the model view so you can understand the orientation.

The partitions are symmetrical in size until you change them.

Provides a visual cue for the XY orientation.