Move a conduit end feature from a duct bank - Intergraph Smart 3D - Help

Intergraph Smart 3D Electrical

Language
English
Product
Intergraph Smart 3D
Subproduct
Electrical
Search by Category
Help
Smart 3D Version
11 (2016)
SmartPlant Foundation / SDx Version
10
  1. Click Select .

  2. Select Conduit Features in the Locate Filter box.

  3. Select the conduit end feature to move.

    You can select multiple end features.

  4. Click Move .

    If you move the conduit end within ΒΌ inch (6.35 mm) of another conduit run end, the software automatically connects the two ends.

  5. Select a move-from point.

  6. Identify the move-to point, and click the graphic view to confirm the new location.

    The software moves the conduit end feature to the new location, or lengthens the conduit.

  • You can also extend or shorten the conduit length using Length box.

  • When you modify the enclosing cableway or duct bank feature properties, the software recomputes the extended conduits and retains initial length.