Insert Split Command - Intergraph Smart 3D - Help

Intergraph Smart 3D Electrical

Language
English
Product
Intergraph Smart 3D
Subproduct
Electrical
Search by Category
Help
Smart 3D Version
11 (2016)
SmartPlant Foundation / SDx Version
10

Divides a cable tray into sections. Some examples of splits are splice plates, box connectors, and bonding jumpers.

After you route cable tray and cableway, you can insert splits so that the model represents the lengths of tray available for purchase. Splits also let you know where hangers and supports will need to be placed.

The Insert Split command allows you to divide a length of tray into sections. The software provides two modes of inserting splits: 1) one split at a time, or 2) many splits at once. In the multi-split mode, the software places splits on a straight feature at locations specified by the purchase length of the tray.

The following picture shows the single-split mode.

The following picture shows the multi-split mode.

  • Cable trays with splits can be logically connected with other cable trays of similar cross-section. They can also logically connect with cableway runs with or without parts.

  • Cable trays with dividers do not form transitions. The connecting cableways always form the transition.

Insert Split Ribbon

What do you want to do?