Route Tab (Cable Properties Dialog) - Intergraph Smart 3D - Help

Intergraph Smart 3D Electrical

Language
English
Product
Intergraph Smart 3D
Subproduct
Electrical
Search by Category
Help
Smart 3D Version
11 (2016)
SmartPlant Foundation / SDx Version
10

Displays the route of the cable run. This tab is only available if the cable has been routed.

Method

Specify how you want to view the cable run route.

Cableways

Lists all the cableway junctions that the cable run passes through. The cableway junctions are named after the cableway or conduit run names and the end of the cableway or conduit run that the cable run passes.

All Hangers

Lists all hangers supporting the cableways that the cable run route passes through.

Key Hangers

Lists only the hangers that are closest to the entry and exit points and any branch points.

Markers

Lists the cable markers on the cable run.

Name

Displays the name of the object.

Location X

Displays the X-coordinate location of the hanger, marker, and cableway junction in the active coordinate system.

Location Y

Displays the Y-coordinate location of the hanger, marker, and cableway junction in the active coordinate system.

Location Z

Displays the Z-coordinate location of the hanger, marker, and cableway junction in the active coordinate system.

Distance

Displays the distance from where the cable run enters the cableway system to the hanger. The distance is measured along the centerline of the cableway and includes any tail 1 length that was specified at creation.