Branch cableway from a turn feature - Intergraph Smart 3D - Help

Intergraph Smart 3D Electrical

Language
English
Product
Intergraph Smart 3D
Subproduct
Electrical
Search by Category
Help
Smart 3D Version
11 (2016)
SmartPlant Foundation / SDx Version
10
  1. Click Route Cableway .

  2. Select a cableway or cable tray turn feature in the model.

    The software finds the point on the centerline closest to the point that you click on the turn feature. This point is the branch point.

  3. On the New Cableway dialog, select Cws-0 in the Specification box.

  4. Specify the other properties as needed, and then click OK.

  5. Continue routing the cableway.

  • Because zero-spec cableway is being routed, the software does not create any parts for the new cableway or its connection to the existing cableway or cable tray.

  • The branch angle is determined by translating the centerline of the connected leg closest to the branch point. The picture below shows the branch point (A), a reference line (B), the centerline (C) of the connected leg, and the resulting branch angle (D).