Move a straight cableway feature - Intergraph Smart 3D - Help

Intergraph Smart 3D Electrical

Language
English
Product
Intergraph Smart 3D
Subproduct
Electrical
Search by Category
Help
Smart 3D Version
11 (2016)
SmartPlant Foundation / SDx Version
10
  1. Click Select .

  2. Select Cableway Features in the Locate Filter box.

  3. Select the cableway feature to move.

  4. Set the Lock Length as needed.

  5. Select the cableway.

  6. Click Move To on the ribbon. If you do not define a starting point using Move From , the software assumes that the current location of the object is the starting point.

  7. Move the cableway to the new location.

  • See Moving at Boundary Connections for information about how the software performs the move operation.

  • When you move a straight feature, the plane of one of the adjacent turns is the default working plane. The software selects the turn first by the plane that includes branches, and then by the plane of larger nominal diameter.

  • You can select one of the orientation handles displayed at the ends of the straight feature as the move-from point. These orientation handles allow you to move the feature in relation to the edge instead of the centerline. For example, you can use the orientation handles to align the bottom with the top of a beam.