Route stacked cableways - Intergraph Smart 3D - Help

Intergraph Smart 3D Electrical

Language
English
Product
Intergraph Smart 3D
Subproduct
Electrical
Search by Category
Help
Smart 3D Version
11 (2016)
SmartPlant Foundation / SDx Version
10
  1. Click Route Cableway .

  2. Select a starting point in the graphic view for the new cableways to display the New Cableway dialog.

  3. On the General tab of the New Cableway dialog, choose the system for the cableway in the System box.

    The System box lists up to the last ten selected systems. Select More to browse all systems in the workspace and database.

  4. In the Cableway box, type the name of the new cableway that you are creating. If you do not enter a name, the software generates a name using the default naming rule.

    You can choose a naming rule in the Name Rule box, if necessary.

  5. Set the specification of the new cableway in the Specification box.

    Use the Category option to view more properties that you can set for the cableway.

  6. Select the Multi-Route tab to specify the settings for multi-routing.

  7. Select Along Depth in the Mode box to create stacked cableways.

  8. In the Cableways Above Master Run box, enter the number of cableways that you want above the master cableway.

  9. In the Cableways Below Master Run box, enter the number of cableways that you want below the master cableway.

  10. In the Vertical Distance Between Trays box, enter the distance between the cableway runs.

  11. Click OK to close the dialog.

  12. Click in a graphic view define the route of your cableway.

    As you click, the software places the master cableway, and the slave runs follow along.

    • You can use PinPoint , Point Along , and the SmartSketch3D relationship indicators when defining your cableways.

    • Using the Angle and Length constraints, you can lock these parameters while routing a cableway.

  13. Right-click to end routing of the cableways.