Edit Conduit Turn Feature Ribbon - Intergraph Smart 3D - Help

Intergraph Smart 3D Electrical

Language
English
Product
Intergraph Smart 3D
Subproduct
Electrical
Search by Category
Help
Smart 3D Version
11 (2016)
SmartPlant Foundation / SDx Version
10

Displays options for turns or bends placed in the model.

Properties

Displays the Conduit Turn Feature Properties dialog.

Move From

Click to specify the starting location of the move vector. If you do not define a starting point, the software assumes that the current location of the object is the starting point.

Move To

Click to specify the ending location of the move vector.

Plane

Activates options for selecting a working plane for the route path. Six options are available:

Plan Plane

Defines the work surface as the XY plane at the depth of the active end. You also can press CTRL+1 to select this option.

Elevation Plane: East-West ( Z Plane: X-Axis)

Defines the work surface as the XZ plane. You also can press CTRL+2 to select this option.

Elevation Plane: North-South ( Z Plane: Y-Axis)

Defines the work surface as the YZ plane. You also can press CTRL+3 to select this option.

Plane by Turn/Branch

Defines the work surface as the plane defined by an existing turn or branch. You select the turn or branch to set the plane. You also can press CTRL+4 to select this option.

Plane by Three Points

Defines the work surface using three points that you define. You also can press CTRL+5 to select this option.

No Plane

Clears any work surfaces. The software does not project points that you place to any plane. You also can press CTRL+6 to select this option.

Run

Displays the name of the conduit run with which the selected turn is associated. All other conduit runs associated with the same parent also appear in the list. You can select another conduit run if necessary.

More displays the Select Conduit dialog. Use this option to select a conduit run that is associated with a different conduit system.

Type

Displays the short code associated with the selected turn. The Type list also contains the short codes associated with any other turns defined in the specification for the current nominal diameter. Selecting an entry from the Type list replaces the selected turn with one of a different type.

Option

Displays the option of the selected turn. The Option list also contains any options defined in the piping specification for the short code selected in the Type box. Selecting another entry from the Option list updates the object accordingly.

Angle Lock

Locks or unlocks the Angle box. Locking the corresponding angle value creates a constraint along which the selected turn angle can be moved.

Angle 2

Specifies the angle of the turn feature located at the end of one associated leg. If this box is blank, there is no turn feature located at the end of the leg. Although this value can be changed, the location of the corresponding turn cannot. Modification of this value repositions the selected turn until the specified angle is achieved.

Angle 1

Specifies the angle of the turn that you are editing. Modification of this value repositions the selected turn until the specified angle is achieved.

Angle 3

Specifies the angle of the turn feature located at the end of one associated leg. If this box is blank, there is no turn feature located at the end of the leg. Although this value can be changed, the location of the corresponding turn cannot. Modification of this value repositions the selected turn until the specified angle is achieved.

Offset

Controls the SmartSketch offset constraint. Type the distance that you want to offset the conduit that you are routing. Select <Disabled> if you do not want to use the offset constraint. Select Set Offset Reference to define the reference point. See Set Offset Reference Dialog (Conduit).