Place components while routing cableway - Intergraph Smart 3D - Help

Intergraph Smart 3D Electrical

Language
English
Product
Intergraph Smart 3D
Subproduct
Electrical
Search by Category
Help
Smart 3D Version
11 (2016)
SmartPlant Foundation / SDx Version
10
  1. Click Route Cableway .

  2. Select the run starting point.

    If you select a feature located at the end of an existing run, the software continues the run of the selected feature. Skip to step 7.

  3. On the General tab of the New Cableway dialog, choose the system for the cableway in the System box.

    The System box lists up to the last ten selected systems. Select More to browse all systems in the workspace and database.

  4. In the Cableway box, type the name of the new cableway that you are creating. If you do not enter a name, the software generates a name using the default naming rule.

    You can choose a naming rule in the Name Rule box, if necessary.

  5. Set the specification of the new cableway in the Specification box.

    Use the Category option to view more properties that you can set for the cableway.

  6. Click OK to close the dialog.

  7. Select points to begin routing your cableway.

  8. Click Insert Component .

  9. On the ribbon, select a component type from Part box.

  10. Click Finish.

  11. Continue routing the cableway.

You can continue routing an existing run by selecting a run end feature or by selecting the run name from the list of available runs.