Place doors from the catalog - Intergraph Smart 3D - Help

Intergraph Smart 3D Electrical

Language
English
Product
Intergraph Smart 3D
Subproduct
Electrical
Search by Category
Help
Smart 3D Version
11 (2016)
SmartPlant Foundation / SDx Version
10

Show me

  1. Click Place Equipment Command to display the Select Equipment Dialog.

  2. Locate the door to place under the Equipment > Architectural node.

  3. In the list view, select the door to place.

  4. Click OK on the Select Equipment Dialog to display the Equipment Properties Dialog.

  5. Define properties as needed, and then click OK to return to the workspace and place the equipment.

  6. Click in a graphic view to select the mounting surface and approximate position for the object. Press the left and right arrow keys as needed to rotate the door by 90-degree increments at any time during the placement of the door. Press the up arrow key to scroll through the three possible axes of rotation.

  7. Using the Place Equipment Ribbon, do any of the following, if needed:

    1. Set an offset for the relationship by specifying the distance in the Offset box.

    2. Click Properties on the ribbon, and type any necessary property information in the grid provided.

    3. Add or change a positioning relationship by selecting it from the Relationship list on the Place Equipment Ribbon.

    4. Select a system with which to associate the new object in the System box. We recommend that you place the door in the same system as the parent wall.