Multi-Route Tab (New Cableway Dialog) - Intergraph Smart 3D - Help

Intergraph Smart 3D Electrical

Language
English
Product
Intergraph Smart 3D
Subproduct
Electrical
Search by Category
Help
Smart 3D Version
11 (2016)
SmartPlant Foundation / SDx Version
10

Displays and defines properties for routing multiple, parallel cableway systems.

Mode

Designates the mode of parallel routing: Along Depth or Along Width. The Along Depth mode creates stacked cableways, and the Along Width mode creates side-by-side cableways.

Along Depth Mode

Cableways Above Master Run

Type the number of cableways to be routed above the master run.

Cableways Below Master Run

Type the number of cableways to be routed below the master run.

Vertical Distance Between Trays

Type the vertical distance between the parallel cableways.

Modeling of Riser Sections

Specifies either constant spacing or constant leg length in riser sections. In the current version, this setting is Maintain Constant Spacing and cannot be changed.

Along Width Mode

Cableways to Left of Master Run

Type the number of cableways to be routed to the left of the master run.

Cableways to Right of Master Run

Type the number of cableways to be routed to the right of the master run.

Horizontal Distance Between Trays

Type the horizontal distance between the parallel cableways.

Modeling of Skewed Sections

Specifies either constant spacing or constant leg length in skewed sections. In the current version, this setting is Maintain Constant Spacing and cannot be changed.